Rubber Lined Pipe Clamp With Nut (Set) is a durable steel clamp with electro-galvanized finish, designed for secure fastening of PVC, PE, PP, cast iron, steel, and copper pipes. Supplied as a complete set including hanger bolt and plastic dowel, it offers quick and reliable installation in various piping systems. The clamp features a high-quality rubber lining (55±5 Shore A) for vibration absorption and noise reduction, while ensuring temperature resistance from –50 °C to +110 °C. Fully compatible with C-profile channels and common installation systems, it provides long-lasting performance in residential, commercial, and industrial applications.
SKS 110 - Rubber Lined Pipe Clamps With Nut (Set)
MTK® Pipe Clamps
Technical Specifications
| Size | 122-135 |
|---|---|
| Clamping Range (mm) | 122 - 135 |
| Length L (mm) | 184 |
| Height H (mm) | 84.5 |
| Sheet (T×W) (mm) | 2x25 |
| Screw (Metric) | M6 |
| Hanger Bolt (Metric) | M10x100 |
| Anchor (mm) | 12 |
| Nut (Metric) | M10 |
| Breaking Load (kN) | 7.8 |
| Recommended Load (kN) | 2.6 |
| Quantity per Box (pcs) | 30 |
| Weight per Box (kg) | 9.3 |
Technical Drawing
Application Example
Material and Coating
Body
High-strength cold-rolled steel
Standards
EN 10346, ASTM A653
Coating
Electro-galvanized (zinc-plated) finish – provides effective corrosion resistance in indoor and outdoor conditions
Mechanical Properties
High yield strength and tensile resistance – ensures reliable performance under heavy loads and demanding industrial environments
Rubber Lining
TPE (Thermoplastic Elastomer)
Hardness
55°±5 Shore A – balance between flexibility and durability
Function
Reduces vibration and noise, protects the pipe surface against mechanical damage
Optional Material
EPDM (Ethylene Propylene Diene Monomer) – designed for higher heat resistance (+120 °C and above) and enhanced chemical resistance
Temperature Resistance
Operational range –50 °C to +110 °C
Installation and Maintenance
Positioning of Hangers and Clamps
In the first step, the pipe route is marked and the drilling points for the hanger bolts are identified according to the project drawings and the slope of the pipeline.
Dowel and Hanger Bolt Installation
The holes are drilled at the marked positions, and the plastic dowels are inserted firmly. Then, the hanger bolts are screwed into the dowels, providing a secure anchor point for the clamps.
Clamp Attachment
Once the hanger bolts are fixed in place, the clamps are attached by tightening the nut located on the clamp body directly onto the hanger bolt. This ensures quick and reliable connection between the clamp and the support point.
Pipe Placement
After the clamps are secured on the hanger bolts, the pipes are positioned into the clamps and tightly fastened.
Tightening and Inspection
All clamps should be tightened with the appropriate torque values. The slope and alignment of the pipeline must be checked to ensure proper installation.
Maintenance
The tightening torque of the clamps should be checked periodically. If any loosening or deformation is observed, immediate corrective action should be taken. In environments with a risk of corrosion, regular cleaning and inspection of the exposed surfaces are recommended.
During installation, the contact surfaces must always be clean and dry to ensure maximum grip and durability.
Application Areas
Structural Natural Gas Piping Installations
Suitable for supporting natural gas pipes in building and structural installations, subject to the project specifications, pipe material, design load, spacing requirements, and applicable natural gas installation regulations.
Sanitary Plumbing and Building Services
Used to support hot and cold water lines, drainage connections, and general mechanical pipework in residential, commercial, and public buildings. The rubber lining prevents direct metal-to-pipe contact and helps reduce vibration and structure-borne noise.
Heating, Cooling and HVAC Systems
Suitable for heating circuits, chilled-water lines, fan-coil connections, and other HVAC pipework where secure fastening and vibration damping are required.
Mechanical Rooms and Service Shafts
Used in plant rooms, service shafts, and technical areas for fixing steel, copper, cast-iron, and plastic pipes in accordance with the project’s spacing and load requirements.
Customer Reviews
There are no approved reviews yet.